Skip to main content

Label Maker Templets

Standard Scheme

Standards for naming and labeling networks and similar devices on installs.

Standard Example

Notes: 

  • All panels are counted clockwise from the North West corner of the building
Wire Labels:

2x Layer labels.  Order of spanning tree.  Top of label = First location.   The bottom of the Label = end of the cable. 

Device In Out Expansion
Firewalls/Routers FW-01,FW-02 FW-01, FW-02 N/A
Switches SWF1-01, SW-IDF

Patch Cables NET-### NET-001, NET-002 NET-001a, NET-001b
Riser Cables Front (Farthing)-(floor)-(number)
End IDF) | ###(
IDF-1-1 | 001 IDF-1-1 | 001a, IDF-1-1 | 001b
Badge Readers BGE-(floor)-(door number)

Camera Cable CAM-### CAM-001
Access-Hub Ethernet 

Access

FL-PNL.###

ACCESS

1-2.001


Panels / Doors
Location/Type First Example Expansion
Main Point of Entry MPOE-(Floor.Panel Number) MPO-FL1-01 N/A - Only 1 MPOE per side
Intermediate Distribution Frame IDF-(Floor)-(Panel Number) IDF-1-1 IDF-1-1a, IDF-1-1b
AccessMedia Control Cabinets/Panels Access-Panel-(Floor)-(Panel Number) Access-Panel-1-1, AccessPanel 1-22-1




Notes: 

MPOE - This is where the internet comes into the building.  In residential buildings, it is commonly seen as a utility closed hidden under stairs or basements.  In large commercial buildings, it's widely a Riser [cables that link IDFs in other floors or wings are called risers].  

IDF - This is where your switching or server equipment goes to support per floor.  This commonly hosts switches that connect back to the MPOE 

Controllers: Physical hardware in Panels, Walls or Mounted to walls
Location/Type First Example Expansion
Door Access Hub DR-DOOR-(floor)-(door number) DR-DOOR-1-7 DR-DOOR-1-7a
Door Intercom IntCom-(floor)-(door) IntCom-1-1 IntCom
Door


Network Devices:
Location/Type First Example Expansion
Firewall/Router (site)-FW## 925-FW01 925-FW02
Switches (site)-SW## 925-SW01 925-SW02
Cameras (location)-(object-in-camera) INTERNAL-CashReg INTERNAL-CashReg02








Notes:

Cameras have special naming schemes.  We define them as internal or external to quickly identify access.  Tenants and Employees typically can access external cameras, but internal camera access is heavily policed.   A camera overlooking a driveway would be called "EXTERNAL-Driveway-North"