Audio|Video Conference Room Designs: 2-4 Person Table Setup
Tools Needed:
| Tool Type | Link | Notes |
| Drill - Makita / Milwaukee / Dewalt | Home Depot | |
| 1" Hole Saw Bit | Home Depot | |
| Low Voltage Scissors | Home Depot | Platt is another option |
| 25ft Tape Measure | Home Depot | |
| (optional) Label Maker | Brady | Platt |
Shopping List:
| Accessory Type | Link | Notes |
| 1x C8 to 2x C7 Wye Cable | Amazon.com | Comes in two colors, white or black |
| 1x NEMA 120v to C7 Adapter, 1ft | Amazon.com | Comes in two colors, white or black |
| 1x Flat Plug white extension cord | Amazon.com | Rotating head is a must. Subject to change based on distance from Wall |
| 2x 96 Watt USB C Apple Charger | Apple.com | 100w is fine for most meetings, if you do a lot of image processing, Video editing, CAD designs you might want something closer to 200w |
| 2x 2m 240w USB C Charger Cable | Apple.com | 1m might be all you need |
| 1x 3m 1" Velcro - White | Amazon.com | For mounting the Chargers under the table |
| 1x 1" White Cable Grommit | Amazon.com | |
| White Cable Velcro | Amazon.com | |
| Floor Velcro Cable Covery (For Carpet) | Amazon.com | Not the biggest fan of these but sometimes its the only solution for controlling cables that you can't put in the floor |
Drawing:
